SOHOSpeed ADSL2/2+ Ethernet/Wireless Gateway User’s Manual
89
Of the three shaping algorithms available on the Shaper Configuration page, only one can be
enabled at a time. An example of each configuration is given as follows.
Example 1: HTB Queue Discipline Enabled
In the example below, HTB Queue Discipline is enabled. The PPPoE connection has a total
of 300 kbits of bandwidth, of which 100 kbits is given to CoS1 and another 100 kbits is given
to CoS2. When there is no CoS1 or CoS2 packets, CoS6 packets have the whole 300 kbits of
bandwidth.
Example 2: Low Latency Queue Discipline Enabled
In this second example, Low Latency Queue Discipline is enabled.
CoS1 is not rate controlled (hence the field is disabled). CoS2 takes 100 kbits when there is
no CoS1 packet. CoS6 has 300 kbits when there is no CoS1 or CoS2 packets. This is similar
to the HTB queue discipline as they are both rate-based algorithm, except that CoS1 is
handled differently.
