SOHOSpeed ADSL2/2+ Ethernet/Wireless Gateway User’s Manual
25
2.
Create a WAN connection from an existing PVC.
For more information about VPI and VCI, refer to the table in section 3.4.11.
3.4.3 Modify an Existing Connection
1.
On the
Setup
main page, select the connection you want to modify from the left-hand
column.
The connections are listed as Connection 1 through Connection 8.
Note:
Up to eight WAN connections of all types are supported.
2.
Make modifications on the individual connection page.
Note:
Some fields are disabled after initial creation.
3.
Click
Apply
to temporarily activate the changes you made.
Note:
The changes take effect when you click
Apply
; however, if the SOHOSpeed
configuration is not saved, these changes will be lost upon SOHOSpeed reboot.
4.
To make the change permanent, click
Tools
at the top of the page and select
System
Commands
.
5.
At the
System Commands
page, click
Save All
.
