manualshive.com logo in svg

CastleNet Technology Inc. ASW802, Руководство пользователя

Поделиться
Скачать
CastleNet Technology Inc. ASW802 Скачать руководство пользователя страница 21

SOHOSpeed ADSL2/2+ Ethernet/Wireless Gateway User’s Manual 

20

A new link is created for this connection in the left-hand column. You can connect, 
disconnect, apply, delete, or cancel this connection using the buttons at the bottom of 
this page. 

Note:

 The changes take effect when you click 

Apply

; however, if the SOHOSpeed 

configuration is not saved, these changes will be lost upon SOHOSpeed reboot. 

11.

To make the change permanent, click 

Tools

 at the top of the page and select 

System 

Commands

.

12.

At the 

System Commands

 page, click 

Save All

.

13.

To check the status, click 

Status

 at the top of the page and select 

Connection Status

.

Field Description
Field

Definition/Description 

Encapsulation 

The technique used by layered protocols in which a layer adds header 
information to the protocol data unit (PDU) from the layer above. As an 
example, in Internet terminology, a packet would contain a header from the 
data link layer, followed by a header from the network layer (IP), followed by a 
header from the transport layer (TCP), followed by the application protocol 
data. Two options are provided: Logical Link Control (LLC) and Virtual 
Channel (VC). 

IP Address 

IP address of the static connection provided by the ISP. 

Mask

Subnet mask provided by your ISP. 

Gateway 

The IP address of your gateway provided by the ISP. 

Default 
Gateway 

The IP address of the default gateway to the Internet provided by the ISP. 

DNS

Domain name server IP address provided by your ISP. You can configure up 
to three DNS IP addresses. 

Mode

Two modes are available: Bridged and Routed. 

For VLAN and PVC field descriptions, please refer to section 3.4.1. 

DHCP Connection Setup 

DHCP allows the SOHOSpeed to automatically obtain the IP address from the server. This 
option is commonly used in situations where the IP is dynamically assigned and is not known 
prior to assignment. 

1.

On the 

Setup

 main page, click 

New Connection

.

The default 

DHCP Connection Setup

 page is displayed. 

2.

From the 

Type

 drop-down box, select 

DHCP

.

The default 

DHCP Connection Setup

 page is displayed. 

Содержание ASW802












































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды