SOHOSpeed ADSL2/2+ Ethernet/Wireless Gateway User’s Manual
49
Field Description
Field Definition/Description
Enable SNMP
Agent
The SNMP agent is enabled by default.
Enable SNMP
Traps
SNMP traps are enabled to send by default.
Name
An administratively-assigned name for the SOHOSpeed.
Location
The physical location of the SOHOSpeed.
Contact
Contact person and/or contact information for the SOHOSpeed.
Vendor OID
Vendor object identifier. The vendor's authoritative identification of the
network management subsystem contained in the entity. This value is
allocated within the SMI enterprises subtree (1.3.6.1.4.1). For example,
Texas Instruments was assigned the subtree 1.3.6.1.4.1.294.
Community
SNMP defines a community to be a relationship between an SNMP agent
and one or more SNMP managers. Once the clear-text community name
corresponds to a community known to the receiving SNMP entity, the
sending SNMP entity is considered to be authenticated as a member of
that community and is granted different levels of access: read-only or read-
write. The combination of community access mode and a MIB-managed
project defines the community profile for each object.
The community profile defines the operations that can be applied to the
object. In the SOHOSpeed, a default community name of public with
access mode of read-only is created in the configuration file. It allows a
GET or a GETNEXT operation to all objects with access rights of READ-
ONLY and READ-WRITE in the MIB.
In the SOHOSpeed, up to three community names can be configured
through the web page. The view_subtrees of SNMPv2c and user-based
security model and view-based access control model of SNMPv3 will be
supported in future SNMP agent development.
Community
Name
Name of community. SNMP supports up to 3 communities including the
default community name of public.
Community
Access Right
Two options are offered:
z
ReadOnly: Allows a GET or a GETNEXT operation to all objects in
the MIB.
z
ReadWrite: Allows ReadOnly access right to all objects and SET
operation to objects defined as read-writable in the MIB.
Trap
Trap is an event notification. There are four standard traps supported in the
SOHOSpeed:
z
WarmStartTrap
z
LinkUpTrap
z
LinkDownTrap
z
AuthenticationFailureTrap
Trap Destination
IP
Destination IP address of the trap. Traps can be sent to three different
destinations.
Trap Community
Community name of the trap.
Trap Version
Two trap versions/formats are supported:
z
SNMP v1
z
SNMP v2c
