SOHOSpeed ADSL2/2+ Ethernet/Wireless Gateway User’s Manual
85
To configure the QoS rule:
1.
In the Ingress field, select not applicable.
The field is applicable for policy routing only.
2.
In the Destination Interface field, select not applicable.
The field is applicable for policy routing only.
3.
In the Class of Service field, leave the default CoS1.
4.
In the Destination IP field, enter 192.168.1.5.
5.
In the Destination IP Mask field, enter 255.255.255.255.
6.
In the Protocol field, leave the default selection TCP.
7.
Click Apply to temporarily activate the settings on the page.
The rule is generated at the bottom of the page.
Note:
The changes take effect when you click Apply; however, if SOHOSpeed
configuration is not saved, these changes will be lost upon SOHOSpeed reboot.
8.
To make the change permanent, click
Tools
at the top of the page and select
System
Commands
.
9.
At the
System Commands
page, click
Save All
.
