manualshive.com logo in svg

CastleNet Technology Inc. ASW802, Руководство пользователя

Поделиться
Скачать
CastleNet Technology Inc. ASW802 Скачать руководство пользователя страница 104

SOHOSpeed ADSL2/2+ Ethernet/Wireless Gateway User’s Manual 

103

Field Description
Field Definition/Description 
Connection 

This field defaults to your SOHOSpeed’s WAN connection over which your 
SOHOSpeed will be accessed. 

DDNS 
Server 

This is where you select the server from different DDNS service providers. 
Only DynDNS and TZO are supported by your SOHOSpeed at this time. 

Status

The status could be one of the following:  

z

Updated: The IP address of the client has been changed and an update 
has been sent to the DDNS server. 

z

No change: The IP address of the client has not been changed. 

z

Error: There is an error with the DDNS update. 

Error
Description  

If the DDNS update status is Error, this field gives a description of the error. 

3.9.4 DHCP 

Clients 

If you have enabled the DHCP server, you can view a list of the DHCP clients from the DHCP 
Clients page. From the Status main page, click the DHCP Clients link, select the LAN Group, 
and the following information of the DHCP LAN clients is displayed: 

z

MAC Address 

z

IP Address 

z

Host Name 

z

Lease Time 

Содержание ASW802












































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды