CastleNet Technology Inc. ASW802 Скачать руководство пользователя страница 60

Страница: 60 / 107

SOHOSpeed ADSL2/2+ Ethernet/Wireless Gateway User’s Manual

Custom IP Filters Page

The Custom IP Filters page allows you to define up to 20 custom IP filtering entries to block
specific services or applications based on:

Source/destination IP address and netmask

TCP port (ranges supported)

Protocol

TCP

UDP

TCP and UDP

ICMP

Any

Field Description
Field Definition/Description
Filter Name

Name of the IP filter rule you are creating.

Enable

The Enable button is checked by default, meaning this rule is automatically
applied when you click Apply.

Source IP

The LAN-side source IP address assigned to outgoing traffic on which
filtering is applied.

Source Netmask

Netmask of the source IP on your LAN side.

Destination IP

You can define the destination IP address to which your source IP will be
banned access. Enter 0.0.0.0 for all.

Destination
Netmask

Netmask of the destination IP. Enter 255.255.255.255 for all.

Port Stat

The starting port number that will be blocked for this application.

Port End

The ending port number that will be blocked for this application.

Protocol

There are five options available: TCP, UDP, TCP and UDP, ICMP, and
Any.

Содержание ASW802












































































































Результаты поиска

Содержание ASW802

Отзывы:

Бренды по названию

Популярные бренды

CastleNet Technology Inc. ASW802, Руководство пользователя

Результаты поиска

Содержание ASW802

Отзывы:

Бренды по названию

Популярные бренды