CastleNet Technology Inc. ASW802 Скачать руководство пользователя страница 25

Страница: 25 / 107

SOHOSpeed ADSL2/2+ Ethernet/Wireless Gateway User’s Manual

In the

PVC

Settings section, enter values for the

VPI

and

VCI

Note:

Your DSL service provider or your ISP supplies these values.

Select the

Quality of Service

(QoS); leave the default value if you are unsure or if the

ISP did not provide this information.
The

PCR

SCR

MBS

, and

CDVT

fields are enabled/disabled depending on the

QoS

selection. Enter the values provided by the ISP or leave the defaults.

Click

Apply

to complete the connection setup. This temporarily activates this connection.

A new link has been created for this connection in the left-hand column. You can apply,
delete, or cancel this connection using this page.

Note:

The changes take effect when you click

Apply

; however, if the SOHOSpeed

configuration is not saved, these changes will be lost upon SOHOSpeed reboot.

To make the change permanent, click

Tools

at the top of the page and select

System

Commands

10.

At the

System Commands

page, click

Save All

11.

To check the status, click

Status

at the top of the page and select

Connection Status

Field Description
Field

Definition/Description

IP Address

IP address of the CLIP connection provided by your ISP.

Mask

Subnet mask provided by your ISP.

ARP Server

IP address of the Address Resolution Protocol (ARP) server provided by
your ISP.

Default Gateway

If checked, this WAN connection acts as the default gateway to the
Internet.

For VLAN and PVC field descriptions, please refer to section 3.4.1.

3.4.2 Tow

Step

PVC

The Two-step PVC page is added to support the Remote Management /Clear Embedded
Operations Channel (EOC) feature, which is a China MII requirement. This page allows WAN
connections to be created in two steps:

Create multiple PVCs with VPI, VCI values, and encapsulation types. The following
encapsulation methods are supported:

PPPoA

PPPoE

Router 1483

Bridge

Static

DHCP

CLIP

Содержание ASW802












































































































Результаты поиска

Содержание ASW802

Отзывы:

Бренды по названию

Популярные бренды

CastleNet Technology Inc. ASW802, Руководство пользователя

Результаты поиска

Содержание ASW802

Отзывы:

Бренды по названию

Популярные бренды