manualshive.com logo in svg

CastleNet Technology Inc. ASW802, Руководство пользователя

Поделиться
Скачать
CastleNet Technology Inc. ASW802 Скачать руководство пользователя страница 78

SOHOSpeed ADSL2/2+ Ethernet/Wireless Gateway User’s Manual 

77

The table below describes the Policy Routing Configuration page settings. 

Field Description
Field Definition/Description 
Ingress Interface 

The incoming traffic interface for a Policy Routing rule. Selections 
include LAN interfaces, WAN interfaces, Locally generated (traffic), 
and not applicable. Examples of Locally generated traffic are: voice 
packets, packets generated by applications such as DNS, DHCP, etc.

Destination
Interface

The outgoing traffic interfaces for a Policy Routing rule. Selections 
include LAN Interfaces and WAN interfaces. 

DiffServ Code Point

The DiffServ code point (DSCP) field value ranges from 1 to 255. This 
field cannot be configured alone, addtional fields like IP, Source MAC, 
and/or Ingress Interface should be configured. 

Class of Service 

The selections are (in the order of priority): CoS1, CoS2, CoS3, CoS4, 
CoS5, CoS6, and N/A. 

Source IP 

The IP address of the traffic source. 

Mask

The source IP netmask. This field is required if the source IP has been 
entered. 

Destination IP 

The IP address of the traffic destination. 

Mask

The netmask of the destination. This field is required if the destination 
IP has been entered. 

Protocol

The selections are TCP, UDP, ICMP, Specify, and none. If you choose 
Specify, you need to enter the protocol number in the box next to the 
Protocol field. 
This field cannot be configured alone, addtional fields like IP, Source 
MAC, and/or Ingress Interface should be configured. 
This field is also required if the source port or destination port has been
entered. 

Source Port 

The source protocol port. You cannot configure this field without 
entering the protocol first. 

Destination Port 

The destination protocol port or port range. You cannot configure this 
field without entering the protocol first. 

Source MAC 

The MAC address of the traffic source. 

Local Routing Mark

This field is enabled only when Locally Generated is selected in the 
Ingress Interface field. The mark for DNS traffic generated by different 
applications are described below: 

z

Dynamic DNS: 0xE1 

z

Dynamic Proxy: 0xE2 

z

Web Server: 0xE3 

z

MSNTP: 0xE4 

z

DHCP Server: 0xE5 

z

IPtables Utility: 0xE6 

z

PPP Deamon: 0xE7 

z

IP Route: 0xE8 

z

ATM Library: 0xE9 

z

NET Tools: 0xEA 

z

RIP: 0xEB 

z

RIP v2: 0xEC 

z

UPNP: 0xEE 

z

Busybox Utility: 0xEF 

z

Configuration Manager: 0xF0 

z

DropBear Utility: 0xF1 

z

Voice: 0 

Note:

 Wildcard (*) entries are allowed for IP Address/Netmask and Port range fields. 

Содержание ASW802












































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды