50
Checking the Operation
(1) Open "Note Pad" (or similar application) provided with Windows*.
(2) Every time the PRINT key is pressed, confirm that the numeric
values displayed on the balance appear on the PC screen.
(3) To end the application, follow the normal end procedure.
Windows* = Windows
®
95, Windows
®
98, Windows
®
Me, Windows
®
2000
Activate Windows by the following procedure the next time. This ensures correct
operation.
Procedure
(1) Disconnect the balance power supply.
(2) Activate Windows* and wait until activation is complete.
(3) Plug the AC adapter into the outlet and turn ON the balance.
Note:
Turning ON the balance before Windows* is completely activated may
cause incorrect operation.
Note:
• This function may not operate on a PC on which a normal U.S.
version of Microsoft Windows* does not operate. Some types of
personal computers may not be able to use this function or some
features may be limited. CAS does not guarantee that this
function can be used on all the PCs without any problems
currently or in the future.
•
CAS is not liable for any direct or indirect problems caused by
this function. It is recommended that important data or programs
on your PC be backed- up before using this function. For the
operation of Windows* or the PC, refer to commercial tutorials or
the appropriate instruction manual.
•
It is necessary to have the "Accessibility Options" function of
Windows* installed on the PC. To install "Accessibility Options",
select "Start"
→
"Setting"
→
"Control panel"
→
"Add /Remove
Programs" and open the "Windows Setup" tag. Place a check
mark on "Accessibility Options." For more information, see the
Windows* instruction manual.
•
Once the serial key device is made effective, software which uses
the RS-232C port on that PC does not operate correctly, unless it
is made ineffective again. If an external modem, plotter or etc. is
connected, remove the check mark placed on "Using the serial
key device" and re-activate the OS after connection to the balance
is terminated.
