41
26. TIME (CAW/CAX series only)
The time can be changed by ±30 second increments or by entering the time
completely. Choose the appropriate function according to the amount of
time correction required.
Adjustment by ±30 Second Increments
(1) From the mass display, press the CAL/MENU several times. When
"SEttinG"
is displayed, press the
→
O/T
←
key.
(2) Press the CAL/MENU key several times to display
"t-HH:MM."
HH
indicates the hour and MM the minutes of the current time.
(3) To change the time, press the
→
O/T
←
key when
"t-HH:MM"
is
displayed.
(4) Press the
→
O/T
←
key when
"SEC AdJ"
is displayed.
(5) Press the
→
O/T
←
key to set the seconds value to 00. If the seconds
value was 00 to 29 when the
→
O/T
←
key was pressed, 00 sec is set,
and if the seconds value was 30 to 59, the minute is rounded up by
one digit and the seconds value is set to 00.
(6) Press and hold the POWER/BRK key to return to mass display.
Entering the Time
(1) From the mass display, press the CAL/MENU several times. When
"SEttinG"
is diplayed, press the
→
O/T
←
key.
(2) Press the CAL/MENU key several times to display
"t-HH:MM."
HH
indicates the hour and MM the minutes of the current time.
(3) To change the time, press the
→
O/T
←
key when
"t-HH:MM"
is
displayed.
(4) Press the CAL/MENU key. When
"tm.AdJ"
is displayed, press the
→
O/T
←
key. The [MENU] and # symbols are displayed to indicate
numeric value entry. The currently set time is displayed as
"HH:
MM: SS”,
where HH indicates the hour, MM indicates the minutes,
and SS indicates the seconds, with the leftmost digit blinking.
(5) Change the blinking digit by pressing the UNIT key to increase the
numeric value by one. The hour can be set from 00 to 23 and the
minute and second from 00 to 59. Press the PRINT key to confirm
the current digit and move the blinking cursor to the next digit.
(6) Press the
→
O/T
←
key to complete the changes.
(7) Press and hold the POWER/BRK key to return to the mass
display.
