10
6.2
FUnC.SEL Menu
From the mass display, press the CAL/MENU key repeatedly until
"FUnC.SEL"
is displayed. Press the
→
O/T
←
key to enter the next menu
level. Items in this menu level include span calibration, zero tracking,
stability detection band, selection or release of units, automatic PRINT,
analog display and Add Load Weighing.
FUnC.SEL
CAL
E CAL
→
Starts span
calibration using the external
weight.
E tESt
→
Starts span check using the
external weight.
i CAL
→
Starts span calibration using the
built- in weight. (CAW/CAX
series only)
i tESt
→
Starts span check using the
built- in weight. (CAW/CAX
series only)
trC:on
trC-on
→
Sets Zero tracking ON.
trC-oF
→
Sets Zero tracking OFF.
bAnd:1
b-1
→
Sets the stability detection band
to 1 count.
b-5
→
Sets the stability detection band
to 5 counts.
b-10
→
Sets the stability detection band
to 10 counts.
Unit.SEL
↔
Enters into the next menu level (unit
selection mode)
F
See Section
6.4 “
Unit.SEL
Menu
"
AtPrt:on
AP-on
→
Sets Automatic PRINT ON.
AP-oF
→
Sets Automatic PRINT OFF.
AdiSP:on
Ad-on
→
Sets Analog display ON.
Ad-oF
→
Sets Analog display OFF.
