8
6.1
Operation Menu
Frequently used menus are contained in the first menu level
(1) Press the CAL/MENU key during mass display.
(2)
"i CAL"
(or standard span calibration) is displayed. (CAW/CAX
series only)
(3) The display changes each time the CAL/MENU key is pressed.
When the desired item is displa yed, press the
→
O/T
←
key to select
it.
(
→
): Press the
→
O/T
←
key
(
←
): Press the POWER/BRK key
(
↓
): Press the CAL/MENU key
0.0000
→
Mass display
iCAL
→
Performs selected standard span calibration. (CAW/CAX
series only)
St.b1t
→
A display of the currently set conditions
F
See the example of
the default conditions at the
bottom of this page.
Stnd
→
Sets the Standard Measurement mode
SAmPLE
→
Sets the Sample Pouring mode
Hi-Stb
→
Sets the High Stability mode
FUnC.SEL
↔
Enters the next menu leve l (application measurement
and individual setting modes).
F
See Section
6.1 “
FunC.SEL
Menu.”
SettinG
↔
Enters the next menu level (system setting mode).
F
See Section
6.2 “
SEttinG
Menu.”
IntFACE
↔
Enter the next menu level (input/output format setting
mode).
F
See Section
6.3 “
intFACE
Menu.”
•
Normal measurement is performed with the CAW, CAX, and CAY
series balances by setting the balance to
"Stnd"
(Standard
Measurement mode). No other settings are required.
•
If the balance environment is poor and the display does not stabilize
easily, select
"Hi-Stb"
(High Stability mode).
•
To perform high speed sampling or sample minute amounts, select
"SAmPLE"
(Sample Pouring mode).
(
→
): Press the
→
O/T
←
key
(
←
): Press the POWER/BRK key
(
↓
): Press the CAL/MENU key
