CP3 version 3003
65
Initialisation and adjustment
In the initial configuration, the installer has to define the number of spaces in each MZC. From that point,
the MZC will increment or decrement the count values as the cars enter or leave the MZCs beneath the
detection points. Since any counting system involves the risk of accumulating detection faults, it is
important to have a manual counting adjustment facility that can be used from time to time whenever
required. In the Dupline® Carpark counting system, this manual adjustment is performed via the built-in
web server, which can be accessed from a smart-phone or a laptop. By using a standard browser, the
number of available spaces from each MZC can be read and adjusted if needed. The web server is also used
for the configuration of the MZC. For further information on this topic, please refer to the SBP2CPY24
software installation manual. This manual is available here:
http://www.productselection.net/MANUALS/UK/cp3_manual.pdf
Stand-alone system examples
A simple parking facility with one entrance and one exit
Minimum requirements for this simple stand-alone system are:
- 1 SBP2MCG324 Carpark master generator
- 1 SBP2WEB24 Carpark controller
- 1 power supply 28VDC
- 2 sensors to detect passing cars at the entrance
- 2 sensors to detect passing cars at the exit
- A PC to program the MZC
- Displays (optional but should always be a part of a counting system)
The power supplies used must have the correct ampere size. Each of the Carpark master modules
(SBP2MCG324) can supply the third wire with 2.6 Amp, and the output of this module is pulsating. This