CP3 version 3003
50
Step 4: Define the Lanes and Lines according to the physical layout by pressing “Add Location Line” on the
toolbar to the right.
When the lanes and lines have been defined, the next step is to assign the carpark sensors to the correct
locations in the lanes and lines respectively.
Option 1: Drag and drop the sensors you want to assign to a specific line by using the SIN number.
Option 2: Assign addresses to the sensors manually by pressing the assign button on each sensor in
consecutive order. Option 2 is the easiest and fastest way to assign the sensors and is recommended for all
types of installations.
Option1:
The picture below is an example of lining the sensors by drag and drop.