Carl Valentin DYNACODE Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 116

background image

Dynacode series

Safety notes

10.15 Operating

manual

11

2 Safety

notes

The direct print module is designed for power supply systems from
110 V to 230 V. Connect the direct print module only to electrical
outlets with a ground contact.

NOTICE!

When changing the mains voltage the fuse value is to adapt
accordingly (see 'Technical data').

Couple the direct print module to devices using extra low voltage only.

Before making or undoing connections, switch off all devices involved
(computer, printer, accessories etc.).

Operate the direct print module in a dry environment only and do not
get it wet (sprayed water, mist etc.).

Do not operate the direct print module in explosive atmosphere and
not in proximity of high voltage power lines.

Operate the direct print module only in an environment protected
against abrasive dust, swarf and other similar impurity.

In case of cleaning and maintenance with an open cover, ensure that
clothing, hair, jewellery and similar personal items do not contact the
exposed rotating parts.

NOTICE!

With the open printing unit (due to construction) the requirements
of EN60950-1 regarding fire protection casing are not fulfilled.
These must be ensured by the installation into the end device.

The print unit can get hot during printing. Do not touch the printhead
during operation. Cool down the print unit before changing material,
removal or adjustment.

Carry out only the actions described in these operating instructions.
Any work beyond this may only be performed by the manufacturer or
upon agreement with the manufacturer.

Unauthorized interference with electronic modules or their software
can cause malfunctions.

Other unauthorized work or modifications to the direct print module
can endanger operational safety.

Always have service work done in a qualified workshop, where the
personnel have the technical knowledge and tools required to do the
necessary work.

There are warning stickers on the direct print modules that draw your
attention to dangers. Therefore the warning stickers are not to be
removed as then you and others cannot be aware of dangers and may
be injured.

«
...
9
10
11
12
13
...
»

Содержание DYNACODE





















































































































Отзывы:

Нет отзывов

Похожие инструкции для DYNACODE

Бренд: Rabe Страницы: 65

Бренд: NEC Страницы: 29

Бренд: Xebex Fitness Страницы: 15

Бренд: qeedo Страницы: 2

Бренд: Qlight Страницы: 3

Бренд: qtran Страницы: 2

Бренд: Q-Optics Страницы: 2

Бренд: Ultrasonic Страницы: 33

Бренд: Össur Страницы: 16

Exoform Dorsal Night Splint

Бренд: Össur Страницы: 34

LUXOMAT net PBM-KNX-DX-4W

Бренд: B.E.G. Страницы: 16

Бренд: neofeu Страницы: 28

Бренд: KAM Страницы: 5

Бренд: Zodiac Страницы: 32

Бренд: Ublox Страницы: 22

Бренд: Cuisinart Страницы: 159

DJ Laptop stand +tray

Бренд: Power Dynamics Страницы: 3

Бренд: Tripp Lite Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды