Carl Valentin DYNACODE, Руководство по эксплуатации

Страница: 9 / 116

Important notes Dynacode series
10.15 Operating manual 9
1.5 Intermittent mode
Figure 5
After starting a print order the printhead moves against the print
medium. Afterwards the printing carriage moves corresponding to the
set or transferred layout length linear over the material which is to be
printed. After the print procedure the printhead again lifts up and the
printing carriage moves again to the starting position.
The direct print module is delivered with a default print length of
65 mm. In order to use the maximum print length, the print position
value must be changed to 93 (see chapter 7.5. Machine
parameters (intermittent mode), page 52.
A: Print position/start position value = 93 mm
B: Print position/start position value = 83
C: Max. position print end
D: Stand-by position
Print principle
Print position