Carl Valentin DYNACODE, Руководство по эксплуатации

Страница: 82 / 116

Signal diagrams Dynacode series
82 Operating manual 10.15
Number of layouts per print order: 1
Data memory: extended
Ribbon save: On
Trigger input print start: increasing slope
Layout:
For a better comparison we used the same layouts as before.
Data receipt:
As soon as the generation of the layout is finished a new one is send
to the direct print module.
Data receipt/generation:
The time of receipt for the first layout is normally shorter because at
this time the direct print module has no further action. At receipt of the
following layout, the time of receipt is longer because the direct print
module receives data and prints at the same time.
Generation:
In mode 'data memory: extended' already received data is always
generated after the start of a print order.
Print order:
Before the current print order is finished the next one is already
generated. The signal output is therefore active and the next start
impulse can be send.
Print:
Before the next start impulse is send, the print has to be finished as
otherwise the impulse is ignored.