Carl Valentin DYNACODE, Руководство по эксплуатации

Страница: 97 / 116

Dynacode series Additional information
10.15 Operating manual 97
12 Additional information
12.1 Column printing
With this direct print module several columns can be printed, i.e. the
information of one column can be printed several times (depending on
its width) on a layout. Caused by this the use of the complete print
width is possible and the generating time is enormously reduced.
For example 4 columns with a width of 25 mm or 2 columns with a
width of 50 mm can be printed onto a layout with a width of 100 mm.
Please note that the first layout is always the one with the largest x
coordinate, i.e. it has the largest distance to the printhead.
Press key to change to the function menu.
Press key as long as to the 'Layout' menu.
Press key to confirm the selection.
Press key as long as the menu item (see illustration) appears.
Press key and to set the layout width. As column width the width
of one layout is entered, e.g. 20.0 mm.
Press key and to enter the number of columns.
Press key and to change the number of columns, e.g. 4 columns
at a layout width of 20.0 mm.
Press key to start a print with indication of number of layouts and
number of lines. The number of layouts corresponds to the number of
layouts that are to print.
e.g. columns: 3, items: 4
The first four layouts were printed but not layout 5 and 6.
Setting
column printing