Carl Valentin DYNACODE, Руководство по эксплуатации

Страница: 83 / 116

Dynacode series Signal diagrams
10.15 Operating manual 83
Number of layouts per print order: 3
Data memory: Off/standard/extended
Ribbon save: On
Trigger input print start: increasing slope
Layout/generation with printer variables:
The use of printer variables means that each layout is different and
the direct print module has to generate several parts of the layout
anew, e.g. variable counter.
Layout/generation without printer variables:
Each of the 3 layouts which are to print are the same and therefore it
is only necessary to generate the layout once.
Data receipt:
Because only 1 print order is send, the direct print module has only to
receive once.
Print order:
As the print order consists of 3 layouts, the print order output is active
as long as all 3 layouts are printed.
Print start/print:
In dispensing mode dynamic only the slope of the start impulse is
recognised as valid print start signal. However, the impulse should
have a minimum impulse width of 50 ms.