Carl Valentin DPM IV, Руководство по эксплуатации

Страница: 34 / 110

Installation and Initiation DPM IV
34 Operating Manual 05.18
5.7 Installing the Control Unit

At the side panels of the control unit (A) are two threads M5 which
can be used for the attachment of control unit at a machine. The
maximum thread depth is 6 mm.

At the back panel of control unit (A) are four threads M6 (C) in
distance of 57 x 57 mm which can be used for the attachment of
control unit at a machine. The maximum thread depth is 8 mm.

Ex works optionally a mounting bracket (E) is offered which can
be used to the pivoting support of control unit (A) to the threaded
holes (B). The mounting bracket can be fastened standing or
hanging with four screws M6 (D) at a machine.

Ex works optionally a fixing flange Ø 30 mm or a base clamp Ø 30
mm are offered which can be used to the support of control unit
(A) at the threaded holes (C). The clamping pieces (F) can be
integrated into a piping system Ø 30 mm.
B
C
F
E
A
D
Figure 15