Carl Valentin DPM IV, Руководство по эксплуатации

Страница: 50 / 110

Function Menu DPM IV
50 Operating Manual 05.18
6.6 Ribbon Saving
Off No ribbon saving.
Standard Maximum ribbon saving performance, i.e. with this
setting there is no loss of transfer ribbon (apart from
the safety distance of 1 mm, so the print fields are
not printed one into the other).
No settings are allowed with which the ribbon
saving no more cannot be achieved. This
particularly applies for the print offset, which can
only be adjusted now in the valid range.
6.6.1 Expert Parameters
This is used from ribbon saving algorithm for the calculation of start
time of printhead downwards movement.
This value is added to the acceleration time of transfer ribbon
movement. Time indication for the time between 'motor reached
material speed' and 'printhead burns'.
If the same value is entered as for PhDownT, the printhead upwards
movement is not started before the transfer ribbon motor reached the
material speed.
It is calculated when the printhead upwards movement is started.
Off: Field ribbon saving mode Off.
PHOnly: Only the printhead is moved. The transfer ribbon is not
stopped.
Normal: Field ribbon saving is executed only if the transfer ribbon
motor is completely stopped.
Strong: Field ribbon saving is executed, even if the transfer ribbon
motor is not stopped.
Ribbon saving mode
Printhead down time
Ribbon motor early
start time
Printhead valve react
time
Field ribbon saving
mode