Carl Valentin DPM IV, Руководство по эксплуатации

Страница: 15 / 110

DPM IV Operating Conditions
05.18 Operating Manual 15
Allowable lines
Shielded line: 4 x 2 x 0,14 mm² ( 4 x 2 x AWG 26)
6 x 2 x 0,14 mm² ( 6 x 2 x AWG 26)
12 x 2 x 0,14 mm² (12 x 2 x AWG 26)
Maximum cable length: Interface V 24 (RS-232C) - 3 m (with shielding)
USB - 3 m
Ethernet - 100 m
To avoid inadmissible heating, free air convection has to be ensured.
Protection according IP: 20
Ambient temperature °C (operation): Min. +5 Max. +40
Ambient temperature °C (transport, storage): Min.
−25 Max. +60
Relative air humidity % (operation): Max. 80
Relative air humidity % (transport, storage): Max. 80
(bedewing of direct print modules not allowed)
We do not take any responsibility for damage caused by:

Ignoring our operating conditions and operating manual.

Incorrect electric installation of environment.

Building alterations of our direct print modules.

Incorrect programming and operation.

Not performed data protection.

Using of not original spare parts and accessories.

Natural wear and tear.
When (re)installing or programming our direct print modules please
control the new settings by test running and test printing. Herewith you
avoid faulty results, reports and evaluation.
Only specially trained staff is allowed to operate the direct print
modules.
Control the correct handling of our products and repeat training.
We do not guarantee that all features described in this manual exist in
all models. Caused by our efforts to continue further development and
improvement, technical data might change without notice.
By further developments or regulations of the country illustrations and
examples shown in the manual can be different from the delivered
model.
Installation of
data lines
Air convection
Limit values
Guarantee