Carl Valentin DPM IV, Руководство по эксплуатации

Страница: 45 / 110

DPM IV Function Menu
05.18 Operating Manual 45
6.4 Device Settings
6.4.1 Print Job
Off: The complete print memory is deleted.
Keep graphic: A graphic res. a TrueType font is transferred to the
direct print module once and stored in the direct print module internal
memory. For the following print order only the modified data is
transferred to the direct print module. The advantage is the saving of
transmitting time for the graphic data.
The graphic data created by the direct print module itself (internal
fonts, bar codes, ...) is generated only if they were changed. The
generating time is saved.
Delete graphic: The graphics res. TrueType fonts stored in the internal
memory is deleted but the other fields are kept.
Layout dimension only: The parameters for layout length, gap
length and layout width can be transferred to the printing system. All
other parameter settings are to be made directly at the printing
system.
On: Sending parameters such as speed and contrast via our design
software to the printing system. Parameters which are set directly at
the printing system before are no longer considered.
Off: Only settings made directly at the printing system are considered.
On: The question referring the customized variable appears once
before the print start at the display.
Auto: The question referring the customized variable appears after
every printed layout.
Off: No question appears at the display. In this case the stored default
value is printed.
On: A layout loaded once from CF card, can be reloaded after a
restart of the printing system automatically.
Procedure: The used layout is saved onto CF card. The layout is
loaded from CF card and printed. After switching the printing system
Off and again On, the layout is loaded from CF card automatically and
can be printed again.
NOTICE!
The last loaded label from CF card is always again loaded after
a restart of printer.
Field handling
External parameters
Customized entry
Autoload