Carl Valentin DPM IV, Руководство по эксплуатации

Страница: 38 / 110

Installation and Initiation DPM IV
38 Operating Manual 05.18
5.13 Loading Transfer Ribbon
NOTICE!
As for the electrostatic unloading the thin coating of the thermal
printhead or other electronic parts can be damaged, the
transfer ribbon should be antistatic.
The use of wrong materials can lead to printer malfunctions
and the guarantee can expire.
A
B
D
C
Figure 16
NOTICE!
Before loading a new transfer ribbon roll, we recommend to
clean the printhead with printhead and roll cleaner (97.20.002).
For detailed information, please see page 84).
The handling instructions for the use of Isopropanol (IPA) must
be observed. In the case of skin or eye contact, immediately
wash off the fluid thoroughly with running water. If the irritation
persists, consult a doctor. Ensure good ventilation.
1. Open the cover of print mechanics.
CAUTION!
Risk of scraping when inserting the transfer ribbon res.
when removing the used transfer ribbon!

Be careful with the bearing plate edges!
2. Push a new transfer ribbon roll (A) onto the unwinder (B) to stop.
NOTICE!
The colour of the transfer ribbon must be on the outside.