Carel HB200C0300CE0, Руководство пользователя, Страница: 11 / 32

11
ENG
Heos BOX R704
+0300140EN - rel. 1.0 - 25.05.2022
2.8 Electrical specifications of the
auxiliary loads
Notice: wiring inputs provided with cable glands; electrical
connections and cable gland tightening to be performed by the installer.
The following auxiliary electrical loads are managed by the electronic
controller on the electrical panel:
Description
of auxiliary load Activation rating (1) (3)
Rated
frequency
(4)
Protection
fuse
[Hz] [A]
Lights NO: 6(6)A, 240Vac, 100kcycles 50 10
Curtain NO: 6(2)A, 240Vac, 100kcycles
NC: 4(2)A, 240Vac, 100kcycles 50 10
Anti-sweat (2) 8A, 240Vac SSR 50 10 (gG) (5)
Evaporator fan NO: 6(6)A, 240Vac, 100kcycles 50 10
Defrost NO: 7.7(4.5)A, 240Vac, 100kcycles 50 12.5
Free NO: 6(6)A, 240Vac, 100kcycles 50 10
Tab. 2.h
Notice :
The unit’s packaging is made with wooden pallets and a double wall
cardboard box closed with plastic straps. The packages can be stacked one
on top of the other, up to a maximum of three, as long as the unit is kept in
the correct position (see the symbols printed on the packaging).
Note, residual risk of the load falling from the transport vehicle these limits
are exceeded.
Exceeding the stacking limit may cause damage to the packaging and its
contents (Heos Box).
Notice :
1. The total current that can be supplied by the electronic controller, in
the maximum load condition, must not exceed 25 A. The calculation
of the current supplied by the electronic control does not include the
optional anti-sweat heater kit. In fact, the optional kit is not powered
by the electronic controller, but by the Heos Box main power supply;
2. Optional kits;
3. Allowable voltage range 200-240V;
4. Allowable frequency range (50-60 Hz);
5. Protection fuse included in the optional kit (position 37 in Fig. 2.j).
Caution: the protection fuse on the board (10 A, time lag) does not
protect the refrigerated showcase load, but only the SSR relay in the
kit.
Caution:
the protection devices in the electronic controller are only
intended for protecting the load against short-circuits. Additional
protection (for example, against overload) are the installer’s responsibility
and cannot be placed inside the Heos Box electrical panel.
2.9 Dimensions and weights
The unit, regardless of the type of application and the cooling capacity
it can supply, has a self-supporting pickled and painted sheet metal
containment structure, RAL9005P, with the dimensions and weights
shown below.
H
123
(4.84 in)
36
(1.42 in)
250
(9.84 in)
460
(18.11 in)
250
(9.84 in)
W
L
B
A
Fig. 2.g
Dimensions
HB200C0300CE0 HB200C0400CE0 HB200C0600CE0 HB200C1000CE0
L (length) mm (in) 1139 (44.84) 1239 (48.78)
W (width) mm (in) 518 (20.39)
H (height) mm (in) 250 (9.84)
A mm (in) 1039
(40.91)
1039
(40.91)
1039
(40.91)
1039
(40.91)
B mm (in) 1119
(44.06)
1119
(44.06)
1119
(44.06)
1219
(47.99)
Mass kg 54 55 62 70
Mass with pack-
aging kg 74 75 82 90
Packaging length mm (in) 1320 (51.97)
Packaging width mm (in) 590 (23.23)
Packaging height mm (in) 395 (15.55)
Tab. 2.i