106
13.42 White Balance Manual Mode
Camera Control Command Type 2
Function
To set white balance manual mode.
Command 00A7h
Length 1
byte
Parameter
Value 2h
Status None
Reference •To set white balance by using
White Balance Value Assignment
command.
•Possible to move only to normal mode from this mode.
•To return notification at the moment of setting command termination
notification ON, when operation terminates. But not return notification in
case of not changing to normal mode by executing
Auto White Balance
Normal
command during operation.
Format of Control Code
d0 d1 d2 d3 d4 d5
d6
Header
Device Num
Command
Parameter
End mark
FFh 30h 3Xh 00h A7h 32h
EFh
Answer Format
d0 d1 d2 d3 d4 d5
Header
Device Num
Error Code
End mark
FEh 30h 3Xh e0 e1 EFh
⇓
Error Flag indicates in 2 figures hexadecimal and returns ASCII code value.
Example: e0 e1
In case of No Error :
00000000B
⇒
00h
⇒
30h 30h
In case of Busy :
00010000B
⇒
10h
⇒
31h 30h
In case of Mode Error :
10010000B
⇒
90h
⇒
39h 30h
Condition of Error flag to be set
Busy
•In process of camera initializing operation by
Camera Reset
command, etc.
•In status of
Auto White Balance in Lock.
•In case of executing
Preset Move
command.
Mode Error
•Not in status of
Camera ON.
•Not in status of
Host Control Mode.
•In the case of not inserted Ir cut-off filter.
•In the case of the low-speed shutter.
In status of changeable white balance mode
Normal
Lock
Manual
