manualshive.com logo in svg

Canon VB-H47, Руководство по эксплуатации

Камера Canon VB-H47 является высококачественным устройством для видеонаблюдения. Установочное руководство можно скачать бесплатно с нашего веб-сайта. Эта инструкция поможет вам правильно установить и настроить камеру для оптимальной работы. Скачайте руководство на manualshive.com.

Поделиться
Скачать
background image

179

Messages Shown in the Information Display

Messages shown in the information display of the Camera Viewer are categorized into the following three types.

Warning Message

List of Viewer Messages

Icon

Category

Explanation

 

Information Message

Displays help messages related to various buttons, pull-down lists, etc., as well as frame 
rate and other information.

 

Warning Message

Displays a message alerting the user when camera control privileges cannot be 
obtained, the audio session stops, etc.

 

Error Message

Displayed when a system error occurs in the Viewer.

Message

Explanation

JavaScript is not available or disabled on your 
web browser.

JavaScript in the web browser could not be used.

Recreating video management information.

The video management information on the memory card is being recreated.

You do not have video reception permission.

A user without video reception privileges tried to connect to the camera.

No audio device.

The [Audio Reception] button or [Audio Transmission] button was clicked 
while the computer audio device was unavailable or disabled.

Audio reception is restricted.

Clicked the [Receive Audio] button when [Audio] > [Audio] > [Audio Server] 
> [Audio Transmission from the Camera] was set to [Disable].
Clicked the [Audio Distribution] button while receiving audio when [Audio 
Communication Method] was set to [Half Duplex]. 

Audio transmission is restricted. 

Clicked the [Audio Transmission] button when [Audio] > [Audio] > [Audio 
Server] > [Audio Reception from Viewer] was set to [Disable].
Clicked the [Audio Distribution] button while receiving audio when [Audio 
Communication Method] was set to [Half Duplex] in [Audio] > [Audio] > 
[General Audio].

Currently in the process of starting or ending 
audio transmission and receiving.

Attempted to start or stop audio transmission and reception while process is 
running for starting or stopping of audio transmission and reception.

Please get camera control privileges.

An attempt was made to operate the camera without camera control 
privileges.

Failed to get camera control privileges.

The request for camera control privileges was denied because the camera 
was being used exclusively by the administrator, etc.

You are not connected to the camera.

An attempt was made to operate the camera when the camera was not 
connected.

Cannot display the set video in this environment.

An attempt was made to display H.265 video while connecting via HTTP 
using the web browser that cannot display H.264/H.265 video.

Your web browser is not supported.

Started the Camera Viewer with a web browser that does not support the 
operating environment.

Another user is already connected as an 
administrator.

The administrator is already connected to the camera.

Waiting for control privileges.

A guest user enters a state of waiting to obtain control privileges.

Cannot display the selected video in this 
environment. Changed to a video that can be 
displayed.

In the case selected video stream cannot be displayed in the current 
environment

S32VE

HM4x

S32VE

Содержание VB-H47




































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для VB-H47

IC Realtime Max Series Quick Start Manual preview
Max Series
Бренд: IC Realtime Страницы: 10
Federal Signal Corporation VISION Installation And Maintenance Instructions Manual preview
VISION
Бренд: Federal Signal Corporation Страницы: 24
DAGE-MTI CCD-100 User Manual preview
CCD-100
Бренд: DAGE-MTI Страницы: 16
Rafiki Protection Quadnet Installation Instructions Manual preview
Quadnet
Бренд: Rafiki Protection Страницы: 32
Ultra Products UltraRAE 3000 Specification Sheet preview
UltraRAE 3000
Бренд: Ultra Products Страницы: 1
U-Prox Multiplexer User Manual preview
Multiplexer
Бренд: U-Prox Страницы: 3
U-Prox WDC Quick Start Manual preview
WDC
Бренд: U-Prox Страницы: 2
ESP GuardCam LED Manual preview
GuardCam LED
Бренд: ESP Страницы: 12
Invision IQeye Sentinel Series Installation And Operation Instructions Manual preview
IQeye Sentinel Series
Бренд: Invision Страницы: 20
Renkforce 2108038 Operating Instructions Manual preview
2108038
Бренд: Renkforce Страницы: 8
Dahua Technology IPC-HFW1230S1-0280B-S5 Quick Start Manual preview
IPC-HFW1230S1-0280B-S5
Бренд: Dahua Technology Страницы: 17
Dahua SD8A240VI-HNI Installation Manual preview
SD8A240VI-HNI
Бренд: Dahua Страницы: 29
Minolta MAXXUM 2XI - PART 1 Manual preview
MAXXUM 2XI - PART 1
Бренд: Minolta Страницы: 24
Idis DC-S3283WHX Operation Manual preview
DC-S3283WHX
Бренд: Idis Страницы: 51
Varex Imaging 2315NDT User Manual preview
2315NDT
Бренд: Varex Imaging Страницы: 60
Audiovox Pursuit PRO-9649N Owner'S Manual preview
Pursuit PRO-9649N
Бренд: Audiovox Страницы: 8
Lilin SR8222 Quick Installation Manual preview
SR8222
Бренд: Lilin Страницы: 111
Ungo MS2007 Owner'S Manual preview
MS2007
Бренд: Ungo Страницы: 14

Бренды по названию

Популярные бренды

Загрузить еще бренды