Canon VB-H47 Скачать руководство пользователя страница 15

Страница: 15 / 195

The following software is available for efficiently configuring and operating the camera.

Camera Operations and Settings

Camera operations are performed using the Camera Viewer/Mobile Camera Viewer.

Camera settings are specified from the Settings page.



Camera Viewer (P. 26) /Mobile Camera Viewer

Controls the camera, and monitors video and various events.

There are two types of viewers; Camera Viewer (mainly for computers) and the Mobile Camera Viewer (mainly for

devices with a screen size of 7 inches or less).

The functions available in the Viewer differ according to the user privilege (P. 28).

Note

• For details on how to use the Mobile Camera Viewer, refer to “Mobile Camera Viewer (Operation Guide)”.



Settings Page (P. 52)

The Settings page is for the administrator to configure and manage the camera.

Software to Install on the Computer

The following software can be installed on the computer to be used.



Camera Management Tool

This tool is used for batch managing multiple cameras, from initial settings to performing maintenance. The Camera

Management Tool can perform the following tasks.

• Detecting cameras

• Various camera settings

• Displaying the Viewer and the Settings page

• Updating firmware, back up/restoring settings, performing memory card and other operations, as well as camera

maintenance.

For details on uses and functions, refer to “Camera Management Tool User Manual”.

The Camera Management Tool can be installed from the installer.

Installer name:

VBToolsInstall.exe



Recorded Video Utility

This utility is used for viewing and managing the videos recorded on the memory card mounted in the camera. The

Recorded Video Utility enables to perform the following settings/operations on recorded videos.

• Displaying a list of videos

• Playing and deleting videos

• Downloading videos to a computer

For details on uses and functions, refer to “Recorded Video Utility User Manual”.

Camera Software

Содержание VB-H47




































































































































































































Результаты поиска

Содержание VB-H47

Отзывы:

Похожие инструкции для VB-H47

Бренды по названию

Популярные бренды

Canon VB-H47, Руководство по эксплуатации

Результаты поиска

Содержание VB-H47

Отзывы:

Похожие инструкции для VB-H47

Бренды по названию

Популярные бренды