Canon VB-H47, Руководство по эксплуатации

Страница: 114 / 195

114
Note
• Click [Clear] to discard the settings and restore the settings saved in the camera. However, note that detection settings only
added to the non-detection settings area are all discarded.

Right-Clicking Menu
When right-clicking on the video display area, detection settings list, or non-detection settings list, a menu appears
that makes it possible to copy, paste, or clear the detection area/non-detection areas, detection line, and detection
conditions. It is also possible to copy and paste settings value of the detection area or event.
Unavailable functions will be grayed out when right-clicking.
Note
• Copying detection conditions settings value does not copy the detection settings name or display name.
• [Paste detection condition settings] is possible only if the source and the target are of the same detection type.
Important
• Make sure to check the video display area to see whether the detection settings area and non-detection settings area are not
unintentionally overlapped. If the detection setting area and non-detection setting area are set close to each other, detection
may be performed incorrectly.