Canon VB-H47 Скачать руководство пользователя страница 147

Страница: 147 / 195

147

Camera date and time settings.

Current Date and Time

The date and time set in the camera are displayed.

Settings

Set the date and time setting method, time zone and daylight saving time for the camera.

[

ettings Method]

Select the date and time setting method.

[

et manually]

Set the desired date and time in [Date] and [Time].

Set the time in 24-hour format in <hour:minute:second> order.

[

ynchronize with NTP server]

Synchronize with the time of NTP server specified in the displayed [Set NTP Server Settings Automatically].

[

et NTP

erver

ettings Automatically]

Select one of the following setting methods.

[Disable]

Enter the IP address or host name of the NTP server in [NTP Server].

[Use DHCP]

Synchronizes with the time of the NTP server that acquired the address from the DHCP server. The acquired NTP

server address is displayed in [NTP Server (DHCP)].

In order to set this, change [System] > [Network] > [IPv4] > [IPv4 Address Settings Method] to [Auto (DHCP)]

(P. 150).

[Use DHCPv6]

Synchronizes with the time of the NTP server that acquired the address from the DHCPv6 server. The acquired

NTP server address is displayed in [NTP Server (DHCPv6)].

In order to set this, change [System] > [Network] > [IPv6] > [IPv6] to [Enable], then set [Auto (DHCPv6)] to

[Enable] (P. 151).

[Use DHCP/DHCPv6]

Synchronizes with the time of the NTP server that acquired the address from the DHCP/DHCPv6 server.

If the NTP server address can be acquired from both the DHCP server (IPv4) and DHCPv6 server, the NTP server

address acquired from the DHCP server (IPv4) will be used.

[

ynchronization Interval (minutes)]

Enter the synchronization interval for the specified NTP server.

[Last

ync Time]

The time last synchronized with the specified NTP server will be displayed.

[System] > [Date and Time]

Содержание VB-H47




































































































































































































Результаты поиска

Содержание VB-H47

Отзывы:

Похожие инструкции для VB-H47

Бренды по названию

Популярные бренды

Canon VB-H47, Руководство по эксплуатации

Результаты поиска

Содержание VB-H47

Отзывы:

Похожие инструкции для VB-H47

Бренды по названию

Популярные бренды