Canon RC-IP1000, Руководство пользователя

Страница: 78 / 94

78
System
Settings such as camera name, terminal output signal format and network. Not available when the camera is using a
serial connection (NU Protocol).
Camera Control
Performs operations for the currently selected camera such as recording, tally control and menu operation.
* Not supported during serial connections (NU Protocol).
S etting item S etting values/description
Camera Name Sets the remote camera name (up to 15 alphanumeric characters).
Frame Frequency (Hz) 23.98, 29.97 59.94, 25.00, 50.00,
Maximum Resolution 1920x1080, 3840x2160
12G-SDI Selects the output signal format (resolution, frame rate) for the video output terminals.
Displayed setting items differ depending on the camera.
HDMI / 6G-SDI
HDMI / 3G-SDI
3G-SDI
IPv4 Setting Method Manual, Auto (DHCP)
Input Volume Sets the input volume.
IPv4 Address Inputs the IPv4 address.
Subnet Mask Inputs the subnet mask.
Default Gateway Inputs the default gateway address.
Apply Sets the [System] tab settings to the camera (except for [Camera Name]). This
process may take some time.
S etting item S etting values/description
Power On Turns the power on.
Standby Switches to standby.
PGM Tally* Turns on/off PGM tally input to the camera.
PVW Tally* Turns on/off PVW tally input to the camera.
Wiper Activates the camera’s wiper (one back-and-forth movement).
Washer Activates the camera’s washer and wiper (four back-and-forth movements).
REC / STBY Starts recording on the camera. Press it again to stop recording.
Camera MENU Off, MENU, Custom Picture, FUNC
Selects the camera menu displayed when pressing a USER button assigned to
[Camera Menu].
SET Used to operate the camera’s menus (SET, CANCEL, direction buttons).
CANCEL
Assignable Button 1 to
Assignable Button 4 Executes functions assigned to the camera’s Assignable Buttons 1 to 4.