Canon RC-IP1000, Руководство пользователя

Страница: 48 / 94

48
Selecting a Camera
Select a camera (belonging to the currently selected camera group) to be controlled.
• If the CAMERA / GROUP lamp is not illuminated, press and hold the SELECT button until the CAMERA /
GROUP lamp illuminates (P. 12).
• When the CAMERA / GROUP lamp is illuminated in blue, press and hold the SELECT button until the lamp
illuminates in green.
• The pressed button will illuminate in orange.
Note
• You can also select cameras with the CAMERA Select button on the camera list screen in the top menu (P. 28). The camera group is
switched automatically.
• During Multi View (PICTURE screen), when [Multi Control] is set to an option other than [Select], you can select a camera by touching the
image on the LCD panel.
Selecting a Preset Group
Up to 100 presets can be registered on a single camera. Starting from number 1, preset groups are assigned in groups of
10 presets, and switching between groups allows you to switch the selected presets.
• The PRESET / GROUP lamp illuminates in green.
• You can also press a USER button assigned to [CAMERA PRESET].
• The SELECT button illuminates, and the preset group select mode (PRESET / GROUP lamp illuminated in
blue) will be activated.
• The non-selected CAMERA / PRESET Select buttons illuminate in blue.
• The preset group is selected and the corresponding GROUP lamp 1-10 is illuminated.
• PRESET Select mode is activated automatically.
Selecting a Preset
From the device, you can select and execute a preset registered on the currently selected camera.
• If the PRESET / GROUP lamp is not illuminated, press and hold the SELECT button until the PRESET / GROUP
lamp illuminates (P. 12).
• When the PRESET / GROUP lamp is illuminated in blue, press the SELECT button.
• The pressed button will illuminate in orange.
Note
You can also execute presets from the preset list screen in the top menu, or from the [Preset List] tab in the PRESET/TRACE menu (P. 31).
1 Check that CAMERA select mode is activated (the CAMERA / GROUP lamp illuminates).
2
Press a CAMERA / PRE S ET S elect button to select the camera to be controlled.
1
Press and hold the S ELECT button to switch to PRE S ET / GROUP S elect mode (P. 12).
2 Press the S ELECT button.
3
Press a CAMERA / PRE S ET S elect button to select a preset group.
1 Check that PRE S ET select mode is activated (PRE S ET / GROUP lamp illuminates in green).
2
Press a CAMERA / PRE S ET S elect button to select the desired preset.