Canon RC-IP1000, Руководство пользователя

Страница: 44 / 94

44
Operating the Menu to Control Camera Power: On / Standby
From the device, you can switch the power of cameras between on and standby. The cameras to be controlled can be
selected from the currently selected camera, cameras belonging to the currently selected group, or all cameras that have
been registered.
Controlling the power of the selected camera
• Proceed to step 3.
Controlling the power of a camera group or all cameras
• You can choose between controlling the selected group, or all cameras.
• When selecting [Standby], touch [OK] once the confirmation screen is displayed.
• The power of the cameras specified as target will change to on or standby.
Using the CAMERA / PRESET Select Buttons to Control Camera Power:
On / Standby
During camera selection mode, you can use the CAMERA / PRESET Select buttons to switch the power of the cameras
between on and standby from the device.
Controlling Camera Power: On / Standby
1 S elect the CAMERA menu > [Camera Control] tab.
1 S elect the CAMERA menu > [Batch Camera Control] tab.
2
S elect [Control Range].
3
S elect [Power On] or [ S tandby].
Condition CAMERA / PRE S ET S elect button operation
Camera on standby Press down and hold the button to turn on the power.
Camera powered on, when the top menu is
displayed Press down and hold the button touch OK to set the
camera to standby.