manualshive.com logo in svg

Canon Oce Colr Wave 500, Руководство по эксплуатации

Поделиться
Скачать
Canon Oce Colr Wave 500 Скачать руководство пользователя страница 36

The delivery destination options 

[Receiving rack (basket)]

Illustration

The [Receiving rack (basket)] is hooked at the
rear side of the printer. It can collect 2 - 5
prints. The [Receiving rack (basket)] bends
the printed output. Not all media types are
appropriate for this finishing option.

NOTE

The [Receiving rack (basket)] is not
supported in combination with the
folding device, Océ Delivery Tray
or take-up module.

Folding device

Illustration

The folding device is an automatic folding
device that folds large sized plots.

NOTE

• The folding device is not sup-

ported in combination with the
[Receiving rack (basket)], Océ
Delivery Tray or take-up mod-
ule.

• If you use a folding device you

must set the type of the folding
device (see 

Define the type of

the folding device on
page 154

).

Océ Delivery Tray

Illustration

The Océ Delivery Tray is a flat tray behind
the printer. The delivery tray can collect a
maximum of 150 prints.

NOTE

The Océ Delivery Tray is not sup-
ported in combination with the
[Receiving rack (basket)], folding
device or take-up module.

The delivery destination

36

Chapter 2 - Get to Know the Printing System

Содержание Oce Colr Wave 500









































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды