manualshive.com logo in svg

Canon Oce Colr Wave 500, Руководство по эксплуатации

Поделиться
Скачать
Canon Oce Colr Wave 500 Скачать руководство пользователя страница 316

Upload a new license

Introduction

Under the [Licenses] tab in Océ Express WebTools you can upload new license files.

NOTE

After the license is uploaded you must restart your system to activate the license file.

IMPORTANT

It is advised to store the license information of the currently active license files in a back-up file

before you activate a new license file. Use the [Save] button to store the current license files

information.

Procedure

1.

Open the [Support] - [Licenses] tab to display the license information page.

2.

Click [Activate] to open a browser window to search for the license file on the network.

3.

Browse the network and select the license file.

4.

Click Next, read the step and click Next.

5.

When the user agreement appears, scroll down to the bottom and check the box in front of "I
agree". 

NOTE

If you do not check the box for agreement, your license will not be installed.

6.

Click Next.

7.

Click Ok to start the activation of the license file. A message appears when the process is
completed.

8.

Restart the system to activate the changes.

Result

• If you update an expired license, the new license file overwrites the previous license file.
• If you upload a new license, the license state in the overview is changed from [Not authorized]

to [Authorized].

Upload a new license

316

Chapter 6 - License Management

Содержание Oce Colr Wave 500









































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды