Canon Oce Colr Wave 500 Скачать руководство пользователя страница 308

Страница: 308 / 360

• The original support rollers.

Rotate the rollers to clean them.

• The transparent contact plates.

Wipe off any soiled areas.

Wipe all the cleaned parts once again using a dry muslin towel.

CAUTION

Watch out, not to get your fingers caught in the scanner top cover.

Press the scanner top cover down gently with both hands, to close it.

NOTE

Check that the left and right scanner open levers are locked into position.

Clean the scanner

308

Chapter 5 - Maintain the Printing System

Содержание Oce Colr Wave 500









































































































































































































































































































































































Результаты поиска

Содержание Oce Colr Wave 500

Отзывы:

Бренды по названию

Популярные бренды

Canon Oce Colr Wave 500, Руководство по эксплуатации

Результаты поиска

Содержание Oce Colr Wave 500

Отзывы:

Бренды по названию

Популярные бренды