manualshive.com logo in svg

Canon Oce Colr Wave 500, Руководство по эксплуатации

Поделиться
Скачать
Canon Oce Colr Wave 500 Скачать руководство пользователя страница 207

How to feed an original

Introduction

When you want to copy or scan, it is important to correctly feed the original in the printer.

IMPORTANT

• The scanner can not scan an original that is thicker than 0.8 mm or rigid originals. When you

use the carrier sheet that is available as an option, ensure that the combined thickness of both
the document and carrier sheet does not exceed 0.8 mm. For more information, see 

How to

use the carrier sheet on page 209

.

• Do not retrieve the original from the printer when it is already fed into the scanner. To release

the original press the stop button on the user panel and tap [Release the original] under the
Smart Access.

Procedure

1.

Feed the original face up and centered on the original feeding table. 

2.

The scanner takes the original. 
The width of the original is automatically detected and displayed in the Smart Access. The live
scan view displays the scanning process.

Result

Depending on the selected [Original release mode] in Océ Express WebTools, the scanner holds
or releases the original after the scan procedure. Tap [Release the original] under the Smart
Access to let the scanner release the document.

When the original is released, you can feed the next original.

How to feed an original

Chapter 4 - Use the Printing System

207

Содержание Oce Colr Wave 500









































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды