
COPIER (Service mode for printer) > OPTION (Specification setting mode) > USER
JA-COMPR
2
Dspl job archive record compress ratio
Detail
To display the compression ratio of images for job archives recorded in jobs other than FAX
reception and I-Fax reception, etc.
In service mode, display is available, but settings cannot be made. To make the settings, use the
MEAP application which supports job archiving.
Use Case
Upon user's request
Adj/Set/Operate Method
N/A (Display only)
Caution
In service mode, display is available, but settings cannot be made. To make the settings, use the
MEAP application which supports job archiving.
Display/Adj/Set Range
0 to 5
0: No conversion, 1: Compression ratio 1/4, 2: Compression ratio 1/8, 3: Compression ratio 1/16,
4: Compression ratio 1/32, 5: Compression ratio 1/64
Default Value
3
FREE-DSP
2
ON/OFF of charge disable screen
Detail
To set whether to display or hide the "Use Charge Management" screen for switching between
charge and no charge.
The hardware switch for switching charge/no charge in the Coin Manager enables the mode in
which all the services are available for free (store manager mode) by temporarily canceling the
charging system.
Even without the hardware switch, the mode can be switched with the software switch when it is
set to display the "Use Charge Management" screen in [Settings/Registration].
Use Case
When enabling all the services to be provided for free by temporarily canceling the charging system
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 1
0: Hide, 1: Display
Default Value
0
Additional Functions
Mode
Management Settings> Charge Management> Use Charge Management
TNRB-SW
2
Display/hide of Toner Container counter
Detail
To set whether to display the Toner Container counter on the Counter Check screen.
Use Case
When showing the Toner Container counter to the user
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 4
0: Hide, 1: Display (70s only), 2: Not used, 3: Display (70s/180s), 4: Display (60s/70s/180s)
Default Value
It differs according to the location.
Supplement/Memo
60s: The number of premature replacements of the Toner Container
70s: The number of installations of a new Toner Container
80s: The number of installations of a new Toner Con the number of premature
replacements
180s: The number of installations of unidentified Toner Container
8. Service Mode
838
Содержание imageRUNNER ADVANCE C3500 III Series
