
1. Toner Bottle
Alarm code: At the same time, 10-0091 - 0094 occurs.
■ Remedies to be performed when E602-xxxx or E614-xxxx error is displayed
Remedy procedure for E602 or E614 differs according to the status of the screen where error is displayed.
Check the remedy procedure by referring to the following flow chart.
NO
YES
Go to
[Error code descriptions]
An error
code is displayed on
a black screen
Start
Go to [Flow Chart 2]
Flow Chart 1
Turn OFF the main power.
+------------------------------------+
| E602-0801 |
+------------------------------------+
Cannot access the hard disk.
If the optional removable hard disk is use, check it is connected
then restart the machine.
IF this is error tou occur, content your service representative.
Display Sample : If an error code is displayed on a black screen
Execute a remedy described in service mode by referring to "Error / Jam / Alarm" in the Service Manual.
If an error code and a message is displayed on a black screen (as above), shift to the hard disk maintenance mode referring to
the Flow Chart 2 and execute the remedy described in Error / Jam / Alarm" in the Service Manual.
6. Troubleshooting
300
Содержание imageRUNNER ADVANCE C3500 III Series
