Canon imageRUNNER ADVANCE C3500 III Series, Руководство по обслуживанию, Страница: 658 / 1252

COPIER (Service mode for printer) > ADJUST (Adjustment mode) > BLANK
BLANK-R 1 Adjustment of right edge margin
Detail To adjust the margin on the right edge of paper.
As the value is incremented by 1, the margin is increased toward the center of the paper by 1 pixel.
Use Case - Upon user's request (to reduce the margin)
- When increasing the margin for transfer separation/fixing separation
Adj/Set/Operate Method Enter the setting value, and then press OK key.
Display/Adj/Set Range 0 to 1000
Unit pixel
Default Value 59
Supplement/Memo The length of a pixel differs depending on the print resolution (600 dpi: 0.0423 mm, 1200 dpi:
0.0212 mm).
Amount of Change per
Unit
1
BLANK-B 1 Adjustment of trailing edge margin
Detail To adjust the trailing edge margin of paper.
As the value is incremented by 1, the margin is increased toward the center of the paper by 0.0423
mm.
Use Case - When reducing the margin upon user's request
- When increasing the margin for transfer separation/fixing separation
Adj/Set/Operate Method Enter the setting value, and then press OK key.
Display/Adj/Set Range 0 to 1000
Unit pixel
Default Value 59
Related Service Mode COPIER> ADJUST> BLANK> BLANK-B2
Supplement/Memo Adjust the trailing edge margin of thin paper/recycled paper 2 with BLANK-B2.
Amount of Change per
Unit
1
BLANK-B2 2 Adj of trailing edge margin:thin/rcycl 2
Detail To adjust the margin on the trailing edge of thin paper1/2 and recycled paper 2.
As the value is incremented by 1, the margin is increased toward the center of the paper by 1 pixel.
Increase the value when blur at leading edge/wrinkles occur with thin paper 1/2 and recycled paper
2.
A value to which the setting value of BLANK-B is added is applied as the margin.
Use Case - When increasing the margin of thin paper 1/2 and recycled paper 2 upon user's request
- When blur at leading edge/wrinkles occur with thin paper 1/2 and recycled paper 2
- When increasing the margin for transfer separation/fixing separation
Adj/Set/Operate Method Enter the setting value, and then press OK key.
Caution Be sure to set a value where the setting value of BLANK-B is deducted from the target value.
Display/Adj/Set Range 0 to 1000
Unit pixel
Default Value It differs according to the location.
Related Service Mode COPIER> ADJUST> BLANK> BLANK-B
Supplement/Memo The length of a pixel differs depending on the print resolution (600 dpi: 0.0423 mm, 1200 dpi:
0.0212 mm).
Blur at leading edge: A phenomenon that the image leading edge on the 2nd side is blurred at 2-
sided print. It is likely to occur on image with high density. Contact of curled portion of paper leading
edge with the Fixing Film causes the phenomenon. When the degree of curl is increased, it is
accompanied with wrinkles.
Adjust the trailing edge margin of paper other than thin paper 1/2 and recycled paper 2 with BLANK-
B.
Amount of Change per
Unit
1
8. Service Mode
636