Canon imageRUNNER ADVANCE C3500 III Series, Руководство по обслуживанию, Страница: 769 / 1252

COPIER (Service mode for printer) > OPTION (Specification setting mode) > FNC-SW
FXWRNLVL 2 Set Fix Film life display threshold VL
Detail To set the threshold value to display the life of Fixing Film.
This item is used to prevent the occurrence of fixing failure caused by the continuous use of the
Fixing Film beyond its life.
When FXMSG-SW is 1, this setting is enabled.
The counter for life judgment is stored in the DC Controller. The counter value cannot be changed
and checked.
Use Case When continuing to use the Fixing Unit beyond the life of the Fixing Film
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 3
0: Warning is hidden.
1: Warning is displayed when the counter for life judgment reaches the specified value. (Driving
time)
2: Warning is displayed when the counter for life judgment reaches the specified value. (Number
of sheets)
3: Warning is displayed when the counter for life judgment reaches the specified value. (Both
driving time and number of sheets)
Default Value 0
Related Service Mode COPIER> OPTION> DSPLY-SW> FXMSG-SW
KSIZE-SW 2 Set of Chinese paper (K-size) support
Detail To set to detect/display the Chinese paper (K size paper: 8K, 16K).
Use Case
When using K size paper
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 1
0: Not supported, 1: Supported
Default Value
It differs according to the location.
Related Service Mode COPIER> OPTION> FNC-SW> MODEL-SZ
Supplement/Memo 8K paper: 270 x 390 mm, 16K paper: 270 x 195 mm
ORG-A4R 2 Special ppr size set at stream read: A4R
Detail To set the size of special paper (A4R) that cannot be recognized at stream reading.
When picking up A4R size original from the DADF of the Inch/AB configuration models, the size
is converted into the specified size so that an image can be formed properly.
Use Case - Upon user's request
- When picking up special paper size original from DADF
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 1
0: A4R, 1: FOLIO-R
Default Value 0
PDF-RDCT 2 PDF reduction set at forwarding
Detail To set whether to reduce the image for transmission when converting the image received by I-Fax
into PDF for e-mail/file transmission.
Use Case
Upon user's request
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 1
0: Following the current setting, 1: Image reduction
Default Value
0
8. Service Mode
747