Canon imageRUNNER ADVANCE C3500 III Series, Руководство по обслуживанию, Страница: 855 / 1252

COPIER (Service mode for printer) > OPTION (Specification setting mode) > USER
IFAX-PGD 2 Set page split TX at IFax Simple mode TX
Detail To set whether to perform split-data transmission on a page basis in the case that the transmission
size in I-Fax Simple mode exceeds the upper limit value.
Use Case Upon user's request
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution In the case to enable split-data transmission, be sure to get approval from the user by explaining
the following:
- No guarantee for page order on the reception side
- There is a possibility of interruption of other received jobs between pages.
Display/Adj/Set Range 0 to 1
0: Disabled, 1: Enabled
Default Value 0
Additional Functions
Mode
Function Settings> Send> E-Mail/I-Fax Settings> Maximum Data Size for Sending
Supplement/Memo Set the upper limit value for transmission data size in Settings/Registration menu.
MEAPSAFE 2 Setting of MEAP safe mode
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set safe mode for MEAP platform.
MPSF is displayed on the Control Panel in safe mode.
In safe mode, MEAP application is stopped while just the system application, which starts with
initial state, is activated. Logs for cause analysis of MEAP failure can be obtained.
Use Case Perform system recovery processing when MEAP platform fails to be activated due to resource
confliction between MEAP applications, service registration or use order.
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 1
0: Normal mode, 1: Safe mode
Default Value 0
PRNT-POS 2 ON/OFF of all pauses at error job cancel
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to pause the print operation of following jobs when a job is canceled due to an error
inside the machine (#037, etc.) except service calls during PDL print.
Use Case
Upon user's request
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 1
0: OFF, 1: ON
Default Value
0
AFN-PSWD 2 Setting of Set/Reg menu access limit
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set restriction on accessing Settings/Registration menu by entering password.
With the setting to enable this mode, password entry of system administrator is required after
pressing Settings/Registration key.
Use Case Upon user's request
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 1
0: Password is not required, 1: Password is required
Default Value 0
8. Service Mode
833