Canon imageRUNNER ADVANCE C3500 III Series, Руководство по обслуживанию, Страница: 764 / 1252

■ DBG-LOG
COPIER (Service mode for printer) > FUNCTION (Operation / inspection mode) > DBG-LOG
LOG2USB 2 Storage of debug log to USB memory
Detail To store a set of debug logs to the USB flash drive at the error occurrence.
A type of log to be collected is set in LOG-TRIG.
If there is a debug log which has been automatically saved, it is archived at this time.
Required time differs according to the device conditions and volume of log data.
Use Case When analyzing the cause of a problem
Adj/Set/Operate Method 1) Install the USB flash drive.
2) Select the item, and then press OK key.
Caution - Wait until the machine recognizes the USB memory (approx. 10 sec.).
- During the data transfer ("ACTIVE" display), do not turn OFF the power/remove the USB memory/
use the screen for operations.
Display/Adj/Set Range During operation: ACTIVE, At normal termination: OK, At abnormal termination: NG
Related Service Mode COPIER> FUNCTION> DBG-LOG> LOG-TRIG
LOG2SRVR 2 For R&D
LOG-TRIG 2 Set of debug log storage condition
Detail To set the conditions (timing, types, etc.) to automatically store the debug logs (stored as an archive
file).
By reading the operation setting file of the setting value from the Main Controller, the conditions
written in the file are set.
When setting a new condition is necessary, read the operation setting file provided by R&D from
the USB memory.
Use Case - When changing the conditions of debug log to automatically store
- When setting a new condition
Adj/Set/Operate Method Enter the setting value, and then press OK key.
Display/Adj/Set Range 0 to 99999
Related Service Mode COPIER> FUNCTION> DBG-LOG> LOG2USB, LOG2SRVR
HIT-STS 2 Display of debug log state
Detail To display whether archive file of the debug log which is matched with the conditions set in LOG-
TRIG exists or not.
Use Case
When checking the debug log automatically saved
Adj/Set/Operate Method
N/A (Display only)
Display/Adj/Set Range
0 to 1
0: No log is available, 1: Log is available
Related Service Mode
COPIER> FUNCTION> DBG-LOG> LOG-TRIG
SYSLOG 2 For R&D
DEFAULT 2 Reset of debug log setting
Detail To clear all debug log settings and return to the state before debug log collection operation.
Use Case - When returning the device in which analyzing the cause of a problem was completed
- When resetting the debug log settings
Adj/Set/Operate Method Select the item, and then press OK key.
LOG-DEL 2 Clearing of debug logs
Detail To delete the debug log file.
The debug log setting is not reset.
Use Case When clearing the debug log
Adj/Set/Operate Method Select the item, and then press OK key.
HIT-STS2 2 For R&D
8. Service Mode
742