Canon imageRUNNER ADVANCE C3500 III Series, Руководство по обслуживанию, Страница: 1038 / 1252

CAUTION:
Register the information of paper loaded during
installation of the host machine.
Be sure to register the correct paper type. Especially in
the case of special paper types such as heavy paper,
registering a wrong paper type may result in image
failure, and when the Fixing Assembly becomes soiled
or paper wraparound occurs, repair by a service
technician becomes necessary.
NOTE:
• Initialization of toner supply, initialization of the
Developing Unit, initialization of the drum, and color
displacement correction, etc. are automatically
performed while Setup Guide is running.
• When all initializations have been completed, Setup
Guide stops (approx.4 minutes).
NOTE:
If a message prompting the user to update the version
appears, press [Update] to automatically update the
version of this equipment.
• If [Skip] is selected, a message prompting the user to
update the version will appear every time the host
machine is started.
• In the service mode (Level 2) shown below, it is
possible to set not to display the message.
COPIER > OPTION > FNC-SW > VER-CHNG
NOTE:
Be sure to follow the procedure to perform the work
shown below.
1. <Paper Settings>
1. Select the paper source for which you want to
specify the paper type, and press [Set].
2. Select the paper type, and press [OK].
3. If [Plain] is selected, the basis weight can be specify
from [Plain Paper Weight Set].
4. If a button corresponding to the paper that has been
set is not displayed, press [Detailed Settings] and
make a selection on the detailed settings screen.
NOTE:
• If the corresponding paper type is not displayed on
the simple settings screen, press [Detailed Settings]
and make a selection on the detailed settings screen.
• If the type of loaded paper is not displayed on the
detailed settings screen, you can register it.
2. <Output Report>
Check the following values from the Setting Value List
which has been output by < Output Report >, and write
them down in the service label inside the Front Cover.
• CONT-Y
• CONT-M
• CONT-C
• CONT-K
• D-Y-LVL
• D-M-LVL
• D-C-LVL
• D-K-LVL
NOTE:
Values to be written down
Check the values surrounded by the frame on the first
sheet of the Setting Value List.
● Informing the System Administrator That
Installation Is Complete
When the installation is completed, ask the system
administrator to change the password.
Also ask the system administrator to keep the changed
password in a safeplace to prevent leakage.
■ Registration of Installation Date
Information
CAUTION:
Be sure that [Date/Time Settings] is completed. (There
are items in Setup Guide.)
9. Installation
1016