Canon imageRUNNER ADVANCE C3330 Series Скачать руководство пользователя страница 43 | Manualshive

Страница: 43 / 200

Canon imageRUNNER ADVANCE C3330 Series Скачать руководство пользователя страница 43

Copier Color | iR-ADV C3330/C3325/C3320 Series |

The marks caused by friction on the second side of the paper of
duplex printing

[Symptom]

In case of duplex printing, the marks caused by friction of image [a] / [b] on the front /rear side edge of the second side of paper
may appear.
The arrow [c] indicates the direction of feeding.
This symptom is likely to occur with a paper has been left in a high humidity environment.

[Cause]

If the paper is curled largely after the fixing for the first side, the behavior of the second side of the paper goes unstable between
the secondary transfer assembly and the fixing nip, and the paper can be twisted or forming an inverted curl while being fed.
If the unfixed portion of the twisted/inverted curled sheet friction on the fixing film, the aforementioned symptom occurs.

[Service work]

[Reference]
Improving a state of preservation of paper may be effective in resolving a trouble in some cases.
Explain to a customer that unused or remaining paper should be stored by being covered with wrapping paper in a place avoiding
direct sunlight.

1) If the device is used in a high humidity environment, turn the dehumidifier switch ON.
The cassette heater is turned on and prevents the paper from absorbing moisture.

2) Identify the paper type with which the symptom occurs and change the setting value of the appropriate location from Service
Mode > Mode List > COPIER > "Option" to "-1".
-Plain paper 1 (64 to 75 gsm): CUSTOM > Change "TMP-TBL".
-Plain paper 2 (76 to 90 gsm): IMG-FIX > Change "TMP-TBL7".

38

«
...
41
42
43
44
45
...
»

Содержание imageRUNNER ADVANCE C3330 Series









































































































































































































Отзывы:

Нет отзывов