Canon ImageRunner 5000 Series, Руководство пользователя

Страница: 276 / 523

Printing a Document Stored, in a Box after Changing the Settings 4-79
4
Using the Mail Bo
x Functions
8
Select the desired memory key from among
memory keys [M1] to [M9], and press the
[Next] key.
NOTE
• The mode memory key where print settings are
already stored shows a small, black square [
■
] in
the lower right corner of the key.
• If you selected a memory key to which a print mode
has already been stored, its settings are displayed.
• If there are more stored printing modes than cur-
rently displayed, you can scroll the list using the [
▼
]
or [
▲
] keys.
●
If you selected a memory key in which a print
mode has not yet been stored:
The message to confirm whether or not you
want to store the new print setting is displayed.
To store: Select the [Yes] key. The new print set-
ting is stored into the memory key.
To cancel storing: Select the [No] key, then
select another key.
●
If you selected a memory key in which a print
mode has already been stored:
The message to confirm that you want to
replace the old print setting with the new print
setting is displayed.
To overwrite: Select the [Yes] key. The contents
of the memory key are replaced with the new
print setting.
To cancel storing: Select the [No] key, then
select another memory key.
When storing is completed, the message “Stored
in memory.” appears for about two seconds.
9
When the print settings are stored, the mem-
ory key storing the print mode is highlighted
and the stored settings are displayed.
E82_US.book Page 79 Tuesday, May 22, 2001 12:11 AM