Canon imageRunner 330, Справочное руководство

Страница: 136 / 260

Setting and Adjusting Custom Common Settings to Suit
Y
our Needs
4–15
Setting Inch Input
When this setting is [ON], keys for inputting values in inches will be displayed on the numeric input screen.
MEMO
●
The initial setting is “ON”.
1
Select the [ON] or [OFF] key, then press the
[OK] key.
2
Press the [DONE] key.
Repeat this until the Basic Features screen appears again.
3
Call up the desired screen as follows:
Additional Functions
Key
1
Custom Settings for Copying, FAX and Printing
Changing the Energy Saver Mode Setting Setting Inch Input
Changing the Energy Saver Mode Setting
You can change the setting for the Energy Saver mode.
MEMO
●
The initial setting is “–10%”.
1
Call up the desired screen as follows:
Additional Functions
Key
1
Select [–10%], [–25%], [–40%] or [RETURN DI-
RECTLY TO STANDARD MODE], and then press
the [OK] key.
2
Press the [DONE] key.
Repeat this until the Basic Features screen appears again.
3
MEMO
●
The approximate energy savings figures for each mode and
the approximate delay times from power ON to ready to
copy are listed below.
• –10% mode
: 19% less power (19 seconds)*
• –25% mode : 30% less power (30 seconds)*
• –40% mode : 43% less power (43 seconds)*
• Return Directly to Standard mode
: 2% less power (0 seconds)*
* The figures in parenthesis ( ) show the approximate time it
takes for the machine to return to the ready to copy state.