Canon imagePROGRAF IPF9100, Руководство пользователя

Страница: 191 / 812

Handling rolls
Setting the Roll on the Roll Holder
Note
•
Printed rolls will not work correctly. Cut away the printed portion before loading the roll.
•
For details on supported sizes and types of rolls, see Paper Sizes (→P.173) or the Paper Reference
Guide. (→P.167)
•
Cut the edge of the roll paper if it is uneven, dirty, or has tape residue.
Uneven, dirty, or sticky edges may cause feeding problems and affect the printing quality.
Be careful not to cut through any barcodes printed on the roll.
•
Wind up the roll so that the edge is even across the roll.
•
After pressing the Load/Eject button, you can refer to instructions on the Display Screen as you load
the paper.
1.
Lift the Holder Stopper lever (a) from the shaft side to unlock it. Holding the Holder Stopper at
the position indicated (b), remove it from the Roll Holder.
Handling Paper 177