Chapter 1
1-78
1.1.7.1.14 Specifications for Puncher Unit-BS1 / Puncher Unit-BT1
0031-5182
[ Manual-related ]
Description
Specifications for the Puncher Unit-BS1 / Puncher Unit-BT1 are as follows.
Field Remedy
Puncher Unit-BS1 / Puncher Unit-BT1
T-1-14
Max. Stapling Capacity/Available Staple Size
When the standard staple cartridge is attached
(The maximum stapling capacity may vary, depending on the paper type and weight.)
LTR and EXEC:
100 sheets (20 lb bond (80 g/m2)) or below 1/2" (11 mm) in height, 98 sheets (20 lb bond (80 g/m2)) + 2 sheets
(140 lb index (256 g/m2))
11" x 17", LGL, and LTRR:
50 sheets (20 lb bond (80 g/m2)) or below 1/4" (5.5 mm) in height, 48 sheets (20 lb bond (80 g/m2)) + 2 sheets
(140 lb index (256 g/m2))
Corner Stapling:
11" x 17", LGL, LTR, LTRR, EXEC, and Custom Size (8 1/4" x 7 1/8" to 11 3/4" x 17" (210 mm x 182 mm to
297 mm x 432 mm))
Double Stapling:
11" x 17", LGL, LTR, LTRR, EXEC, and Custom Size (7 1/8" x 7 1/8" to 11 3/4" x 17" (182 mm x 182 mm to
297 mm x 432 mm))
Available Saddle Stitch Capacity/Size
Saddle Stitch:
25 sheets (20 lb bond (80 g/m2)) (including 1 cover sheet)
Saddle Folding:
5 sheets (20 lb bond (80 g/m2))
Size:
13" x 19", 12 5/8" x 17 11/16", 12" x 18", 11" x 17", LGL, LTRR, and Custom Size (8 1/4" x 11" to 13" x 19 1/
4" (210 mm x 279.4 mm to 330.2 mm x 487.7 mm)
Cover Weight:
Requires the paper weight of the main document (more than 17 lb bond (64 g/m2)) or more.
* Available Saddle Stitch capacity may vary, depending on the paper type and weight.
Power Source/Maximum Power
Consumption
120-240 V AC, 50/60 Hz, 8 A/500 W or less
Dimensions (H x W x D)
48 3/4" x 31 1/2" x 31 1/4" (1,239 mm x 800 mm x 792 mm)
Weight
Approximately 397 lb (180 kg)
Installation Space Including the Main Unit
(W x D)
92" x 36 3/4" (2,335 mm x 934 mm)
(when the Duplex Color Image Reader Unit-H1 and the Upright Control Panel-D1 are attached)
Item
Specifications
Paper Size/Weight/Type
Size:
Puncher Unit-BS1:
Two Holes:
LGL, LTRR, and Custom Size (7 1/8" x 7 1/8" to 11 3/4" x 17" (182 mm x 182 mm to 297 mm x 432 mm))
Three Holes:
11" x 17", LTR, EXEC, and Custom Size (9 1/2" x 7 1/8" to 11 3/4" x 17" (240 mm x 182 mm to 297 mm x 432 mm))
Puncher Unit-BT1:
Two Holes:
LGL, LTRR, and Custom Size (7 1/8" x 7 1/8" to 11 3/4" x 17" (182 mm x 182 mm to 297 mm x 432 mm))
Four Holes:
11" x 17", LTR, EXEC, and Custom Size (10 1/8" x 7 1/8" to 11 3/4" x 17" (257mm x 182 mm to 297 mm x 432 mm))
Weight:
14 lb bond to 110 lb cover (52 g/m2 to 300 g/m2)*
* The maximum weight for coated paper is 110 lb index (209g/m2).
Paper Size/Weight/Type
Type:
Thin 2 (14 lb bond to 16 lb bond (52 g/m2 to 63 g/m2)), Thin 1 (17 lb bond to 20 lb bond (64 g/m2 to 79 g/m2)), Plain
1 (20 lb bond to 24 lb bond (80 g/m2 to 90 g/m2)), Plain 2 (25 lb bond to 28 lb bond (91 g/m2 to 105 g/m2)), Heavy1
(29 lb bond to 34 lb bond (106 g/m2 to 128 g/m2)), Heavy 2 (35 lb bond to 40 lb bond (129 g/m2 to 150 g/m2)), Heavy
3 (40 lb bond to 66 lb cover (151 g/m2 to 180 g/m2)), Heavy 4 (67 lb cover to 80 lb cover (181 g/m2 to 220 g/m2)),
Heavy 5 (82 lb cover to 140 lb index (221 g/m2 to 256 g/m2)), Heavy 6 (140 lb index to 110 lb cover (257 g/m2 to 300
g/m2)), Color, Recycled, Tab, Bond, Letterhead, Coated, and Textured
Содержание imagePRESS C800 Series
